Operation Manual

51
▲ STARTING UP
• Place the motor base on a dry and even work top, out of the reach of children,
near a wall power socket.
• If the appliance has been used already and is still warm, let it cool down.
• Check if the heater plate and the bottom of the jug are clean and dry.
■ MAKING FROTHED MILK, HOT OR COLD
• Lift the lid off the glass jug (fig. 1).
• Place the toothed foam blender on the pin in the glass jug (fig.2).
• Fill the glass jug with cold milk. Look for the MIN and MAX markings. If you pour
in too much milk – more than 350 ml – the milk, which increases in volume when
heated, might spill out of the jug (fig. 3).
• Place the lid back on the glass jug (fig. 4).
• Place the glass jug on the heater plate of the appliance base, using the handle.
Plug the power plug into a suitable wall outlet (fig. 5).
fig. 1 fig. 2 fig. 3
fig. 4 fig. 5 fig. 6
SOLIS Milchaufschäumer E_2015 29.07.15 14:14 Seite 51