Operation Manual

5352
A Measuring cap in the lid
for measuring off and adding in-
gredients through the lid opening
after the frothing process has been
started
B Special lid for perfect seal
with large removal hoop for easy
removing of the lid
C Milk jug with heat insulated
handle, dishwasher safe
Stainless steal jug for max. 0,5 litres
of milk, with inlying MAX and MIN
marking and spout; in the jug bot-
tom: seating pin for frothing discs
D Motor base with heating chamber
Induction heating technology for ef-
fective, even heat distribution
E START/STOP push and rotary
button with 2 functions:
1. Press the START/STOP button to
start or stop frothing milk (if the
power plug is plugged in)
2. Turn the rotary button to set
the desired temperature; in the
COLD STIR setting, the milk is not
heated, just frothed
F LED button surround
– Once the power plug is plugged
in, the button surround lights up
constantly
– If the milk frothing function is
activated, the button surround
flashes
– The button surround goes out in
standby mode (after approx.
30 seconds without button use);
if the START/STOP button is
pressed in standby mode, the
appliance starts with the frothing
function right away and the but-
ton surround flashes again
G Cord wrap on the bottom of the
motor base with cord opening
H Storage device for second froth-
ing disc
(Caution: The frothing disc can be
swallowed by small children!)
I Cappuccino frothing disc
with teeth: for thick, creamy milk
froth
CAPP (I)
LATTE (J)
J Latte frothing disc
without teeth: for silkily stirred,
slightly frothed milk
CAPP (I)
LATTE (J)
 APPLIANCE DESCRIPTION
A
B
H
J
C
D
E
F
G
I