Operation Manual

161
E
The setting the appliance is currently in will
illuminate. Before changing the brewing temper-
ature, PROGRAM will illuminate.
Specifically, the light indicators describe the
following settings:
• Pressing one of
the following
buttons will
change the setting
according to
the list. You can
make adjustments
between -2°C and
+2°C or return to
the standard set-
ting. However, you
have to press the
button within 5
seconds once you
are in changing
mode.
* based on the
standard setting
Indicator light
Description
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
Standard
setting
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
+1 °C*
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
+2 °C*
−1 °C*
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
−2 °C*
FILTER SIZE
• Please note: If no button is pressed within the
first 5 seconds of changing mode, the appli-
ance will return to standby mode, the brewing
temperature will not be changed and you will
have to start over again.
• If you have made your adjustment and the
desired light indicator illuminates, an acoustic
signal will sound twice and your setting will be
saved.
• After that, your appliance will return to stand-
by mode.
To return to the standard setting:
Press the PROGRAM button.
PROGRAM
To increase brewing temperature by +1°C:
Press the button for one cup .
PROGRAM
To increase brewing temperature by +2°C:
Press the button for two cups .
PROGRAM
To reduce brewing temperature by -1°C:
Press the FILTER SIZE button.
SINGLE
FILTER SIZE
DOUBLE
PROGRAMPOWER
To reduce brewing temperature by -2°C:
Press the POWER button.
SINGLE
FILTER SIZE
DOUBLE
PROGRAMPOWER