Solis_Manual_RHI-1P(5-10)K-HV_USA_V1,1

5. Operation 5. Operation
B-BO X HV
Figure 5.28 Battery Select
Battery Module:
5.6.3.2 Battery Wakeup
Figure 5.31 Battery Wakeup
SettingsBattery Control
2015-02-23 19 35
BatterySelect
BatteryWakeup
Y E S =< E N T > N O = < E S C >
Settings
Battery Select
2015-02-23 19 35
Y E S =< E N T > N O = < E S C >
E S C
U P
D O W N E N T
OverDischg SOC： 020%
Figure 5.29 Over Discharge SOC.
Figure 5.30 ForceCharge SOC
Settings
Battery Select
2015-02-23 19 35
Y E S =< E N T > N O = < E S C >
E S C
U P
D O W N E N T
ForceCharge SOC： 005%
.This function should be activated only after the installation In the case of a low battery
voltage shutdown, the inverter will shut-down. This setting can be enabled, so when the
inverter detects PV or grid it wakes up the battery. This function conflicts with the battery
reverse polarity protection( If the installer connects cables with wrong polarity the inverter ,
can protect itself from damage).To avoid the possible damage during installation do not ,
activate battery wakeup function before finishing the first commissioning.
.36. .37.