Solis_Manual_RHI-1P(5-10)K-HV_USA_V1,1

Figure 5.10 Meter Info
Settings
Meter Info
2015-02-23 19 35
External：
Meter CurrentL1：
Meter VoltageL2：
Meter Power：
Meter Energy：
E S C
Meter CurrentL2：
00.00A
+000000W
0000000.00kWh
5. Operation 5. Operation
Meter VoltageL1：
000.0V
00.00A
000.0V
Output Energy：
0000000.00kWh
Internal：
Meter Current：
Meter Power：
Meter Energy：
00.00A
+000000W
0000000.00kWh
Meter Voltage：
000.0V
Output Energy：
0000000.00kWh
NOTE:
Meter Power/Grid Power: Positive value indicates exporting power to the
grid. Negative value indicates importing power from the grid.
Charge Power: Positive value indicates charging, negative value indicates
discharging.
5.4 Settings
In the "Settings" section, Time/Date, Slave address and language can be modified.
Figure 5.11 Setting
Settings
Settings
2015-02-23 19 35
Set Time/Date
Set Address
Set Language
5.4.1 Set Time/Date
Figure 5.12 Set Time
Set Time/Date
2015-02-23 19 35
N E X T =< E N T > D O N E =< E S C >
MM DDYY
2 232015 --
HH MM
20 53 :
E S C
U P
D O W N E N T
Set the time and date on the inverter. Must set this according to local time as it
affects the daily yield calculation. (If Solis monitoring system is used, must set
the correct time zone of the system, otherwise datalogger will update the inverter
time based on the time zone of the system.)
Press "UP" and "DOWN" to change the value.
Press "ENT" to move the cursor.
Press "ESC" to save the change.
.27..26.