User Manual

21
Detailed App Instructions
Scene mode
You can choose to set it as Normal, back light compensation,
night IR, High light compensation or Dynamic according to
your actual light environment of installation place.
PIR Detection Sensitivity
You can set the PIR sensitivity as Disabled, Low, Medium
or High.
1) When you set the PIR as Disabled, you will not record
and receive any motion triggered events.
2) It is recommended to set the PIR Detection to High so
that you could capture as more as a motion triggered
from the beginning part of the event.
3) Try to capture more the beginning of the triggered
event,please adjust your camera angle a bit closer to your
aimed spot (Check page 15 diagram).
2019-12-27 15:00:36
Online
10s
10s
10s
Normal: Natural light at day time
Backlight compensation: Increase the level of exposure and brighten
the whole scene.
High light compensation: Reduce exposure and deal with overexposed
images with lights.
Dynamic: Brighten the light on dark areas and balance the over light
areas in images. It is recommended to set it as Normal for outdoor
cameras,other scene mode are adjustable for indoor cameras.