User Manual

Not work with 802.11 ac or ax 5G or higher frequency band.
In-App Setup
Slide switch to the right to turn on the camera.
LED flash green once and then flashes blue. Then you will hear
the following voice “The camera is now ready to begin pairing”.
6. Turn on the camera
4. Connect your phone to 2.4Ghz wifi first.
Only work with 802.11 b/g/n frequency band 2.4G Wi-Fi .
(It's ok to use Cell phone 4G data to live viewing it after the
camera was Paired up with 2.4g Wi-Fi network firstly.)
On
Off
5.Install the antenna and point the antenna to the sky, antenna
is not waterproof downward.
(Note: the camera can not be paired up without antenna)
7