Technical Manual

52
Select the option “Register” and click on the option “IMPORT”.
• Open the “sCBTransshipment” app again and enter on the
“Menu/Configuration” path option “Import Records” .
6. Commands used on the Transshipment remote update
6.1 Parameters that can be updated remotely on the transshipment
The MAG100 Transshipment firmware are ready to receive remote commands to
update the parameters already registered by the SGPA:
Command
Description
Update Crate
Update crate records
Update Employee
Register a new employee code on the computer on board.
Update Farm, Field
Register FZT on the computer on board
Update Productive
Operation
Register new productive operation code on the computer on
board.
Update
Unproductive
Operation
Register new unproductive operation code on the computer on
board.
Update Productive
Operation
(MAG100)
Register new ´productive operation code on the computer on
board MAG100.
Port Lock
Update the lock used for security matters on the (MAG50R)
Start lock
Update the start lock (MAG50R)
Update
Unproductive
Record
Update the instant stop code of the machine
Text message (64
Characters)
Send text messages to the computer on board up to 64
characters.
Text message
Characters (32)
Send text messages to the computer on boar up to 32 characters.
Machine Code
Change the cut code in which the machine is working.