Technical Manual

46
Transshipment special codes* and their functionality:
Field
Description
1
Operation Refueling, immediately,
the amount of fuel necessary will be
asked.
2
Shift change, the register of the next
operator will be asked.
4
Transshipment assigned to a
harvester. From the FLOW
0
No special code
N
Stop without special code
S
Maintenance Operation– Enter the
maintenance code
X
Maintenance Operation– Does not
need to enter the maintenance code
L
Indicates the operation to start the
lifting
H
Stop on transshipment line (empty)
– FLOW
C
Waiting for lifting (full) – FLOW
5
Moving on board
6
Increasing the Alarm of Idle engine
A
Cleaning assistance on the
courtyard– available only on ZIG19
calls
D
Enters on Moving for dumping
status
B
Enters on lifting status– for
contingencies if there is no CDC
7
Mandatory, stays on this operation
until a new stop code is entered
operacoes_produtivas:
The productive operations record ordered from the small to the biggest
registration operation code
Example: 1000;COLHENDO CANA;N;N;N
Field
Description
1000
Code operation
COLHendo
Description of the Operation
N;N;N
Reserved Field
C_EQUIP:
This field is used only on the CF card. The equipment records ordered from lowest to
highest operation code.
Example: 1111;COLHEDORA
Field
Description
1111
Code/ equipment number
COLHEDORA
Equipment description
C_COORDENADAS:
This option deals with necessary record of the point that identify a controlled area.