User Guide

5-axis MachiningSolidCAM2005 Milling Manual
86
Exercise 20:
1. Load the CAM-Part Exercises\Lead_in_Lead_out\Undercut.prt
We will now see how the gouge checking affects the entry and exit arcs.
2. Start a new 5-axis Operation and choose Tool #1 from the Part Tool table.
3. Set the following parameters in the Geometry page:
Choose the Parallel Cuts option for the Cut Control.
Click on the Constant Z button to define the Machining Angle.
Choose the One Way option in the Cutting Method field.