User Guide

5-axis MachiningSolidCAM2005 Milling Manual
66
• Full, avoid cuts at exact edges
With this option the tool path will be generated on
the whole surface but avoids the surface edges.
Simulate the appropriate operation of Exercise18.
The CAM-Part located in the Exercises/Cutting_
area folder.
• Limit cuts by one or two points
This option enables you to limit the machining
between one or two points. The Data button
displays the Limit cuts between two points dialog.
This dialog enables you to define point coordinates
or pick the points from the workplane.
Simulate the appropriate operation
of Exercise18. The CAM-Part is
located in the Exercises/Cutting_
area folder.
Edge
Edge
Point 1
Point 2