User Guide

5-axis MachiningSolidCAM2005 Milling Manual
126
9.5.1 XZ Limit
This switch is set to true to limit the tool on the XY plane between angle b1 and
b2.
In this example you can see that the
minimum tool limit angle b1 = 30 degrees
and the maximum angle b2 = 120 degrees.
9.5.2 YZ Limit
This switch is set to true to limit the tool on the YZ plane between angle a1 and
a2.
In this example you can see that the
minimum tool limit angle is a1 = 40 degrees
and the maximum angle is a2 = 95 degrees.
You can use any angle between 0 and 360
degrees.
Tool axis
Z
X
B1=30°
B2=120°
Tool axis
Z
X
B1=40°
B2=95°