mco connection Servo motor connector -upper : servo motor 1 -lower : servo motor 2 Battery 1, 2 connector *The visible part of the metal pin upwards Each connector protrusion is positioned at the top Deceleration motor 1, 2 connector APP Main screen to appear when it is executed Select a desired model Switch Main screen to appear when a model is selected.
Control setting Motor setting Zero Turn Function (to select motor at left and right of manipulator touch slide) Fine tune settings of a selected motor : Steering angle, origin point, speed etc. When the control slide touch is released, it enables the slide to return to its original position Recoding and Sensor application If a motion is saved, a sensor button is activated. When a sensor value is in the orange area, saved motion is replayed.
FCC Warning Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
