Installation and Operation Manual

Confidential & Proprietary 8/57 Alliance-TR
13. Some units may become hot during operation. Be careful not to touch the heat-sink of these
units due to high temperature.
- Certification
 FCC: This equipment complies with the applicable sections of Title 47 CFR Parts 15, 22, 24 and 90.
 UL/CUL: This equipment complies with UL and CUL 1950-1 Standard for safety for information
technology equipment, including electrical business equipment.
 FDA/CDRH: This equipment uses a Class 1 LASER according to FDA/CDRH Rules.This product
conforms to all applicable standards of 21 CFR Chapter 1, Subchaper J, and Part 1040.
 Home/Personal use are prohibited..
 Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP
and/or indoor‐only restrictions is prohibited.
Notice: SOLiD recommends incorporating a readily accessible disconnect device external to the
equipment.
Notice: SOLiD recommends powering the system through wiring installed in a normal building. If powered
directly from the main power distribution system, it is recommended to use additional protection, such
as overvoltage protection device.
A. This equipment is categorized as “Pollution Degree 2”.
 Licensing is required to be used in EU member states.
 Signal booster warning label message should include