User's Manual
Confidential & Proprietary 14/44
Section3
SystemconfigurationandFunctions
3.1
HROU(HighpowerRemoteOpticUnit)
3.1 HROU (High power Remote Optic Unit)
HROU consists of two unit, one is HMRU(High power Main Remote Unit) and the other is HARU(High
powerAdd‐onRemoteUnit).
The biggest difference between HMRU and HARU is whether R‐OPTIC module exist or not in the
enclosure.
HMRUreceivesTXopticalsignalsfromODUandconvertstheminto
RFsignals.TheconvertedRFsignals
areamplifiedthroughHighPowerAmpinacorresponding HRDUbandcombinedwithUDCU,PAUand
Cavityduplexer,andthenradiatedtotheantennaport.
When receiving RX signals through the antenna port, this unit filters out‐of‐band signals in a
corresponding HRDU
and sends the results to R‐OPTIC to make electronic‐opticalconversion of them.
Afterconverted,thesignalsaresenttoaupperdeviceofODU.HMRUcanbeequippedwithuptofour
HRDUs(HighRemoteDriveUnit)andthemodulesupportssinglebandonly.
HARU receives TX RF signal
from HMRU and amplifies through High Power Amp in a corresponding
HRDUcombinedwithUDCU,PAUandCavityduplexer,andthenradiatedtotheCU(CombiningUnit)
When receiving RX signals through the antenna port, HHRDU filters out‐of band signal in a
correspondingHRDUandsendstheresultstoMHRU
throughRFcable.