Installation Manual

Confidential & Proprietary 22/43
Functions:
 Providing a circuit breaker to turn AC power ON/OFF
 Providing DC power each HRDU
 Providing DC power and signal to FAN tray
 LED indicators for showing alarm staus of PSU
Caution
DOUBLE POLE/NEUTRAL FUSING
3.1.3.3 Remote Optic(R OPTIC)
Remote Optic converts optical signals into RF signals and performs vice versa. It also has internal ATT for
optical compensation to compensate for optical cable loss. It provides two path in pairs(TX/RX) to
transport RF signal to ARUs
Figure 9. R OPTIC Outer Look
3.1.3.4 Remote Central Processor Unit (RCPU)
RCPU can monitor and control each module of HROU. This unit receives and analyzes upper
communication data from Remote Optic and reports the unit's own value to upper devices. At the front
of the module, it has LED indicator to show system status, letting you check any abnormalities at a time.
At the same front, it also has communication LED Indicators to show communication status with upper