User's Manual
Table Of Contents
- Section1 Safety & Certification Notice
- Section2 System Overview
- Section3 System configuration and Functions
- 3.1 HROU (High power Remote Optic Unit)
- 3.1.1 Specifications of HROU
- 3.1.2 Block Diagram of HROU
- 3.1.2.1 HMRU block diagram
- 3.1.2.2 HROU inner look
- 3.1.2.3 HROU part list
- 3.1.3 Function by unit
- 3.1.3.1 High Remote Drive Unit (HRDU)
- 3.1.3.2 Remote Power Supply Unit ( RPSU)
- 3.1.3.3 Remote Optic(R OPTIC)
- 3.1.3.4 Remote Central Processor Unit (RCPU)
- 3.1.4 Bottom of HROU
- 3.1.4.1 Functions
- 3.1 HROU (High power Remote Optic Unit)
- Section4 System Installation
4.1.8 HROU ALM IN/OUT Port cabling
The ALM IN/OUT Connector is located at the bottom of Remote Unit enclosure fixed. Cable can
be connected by using connectors.
Figure 21. Location of ALM IN/OUT Connector
The specification of compression ALM IN/OUT Connector is like below
Figure 22. Information of ALM IN/OUT Connector
Confidential & Proprietary 39/44