User's Manual
Table Of Contents
- Section1 Safety & Certification Notice
- Section2 System Overview
- Section3 System configuration and Functions
- 3.1 HROU (High power Remote Optic Unit)
- 3.1.1 Specifications of HROU
- 3.1.2 Block Diagram of HROU
- 3.1.2.1 HMRU block diagram
- 3.1.2.2 HROU inner look
- 3.1.2.3 HROU part list
- 3.1.3 Function by unit
- 3.1.3.1 High Remote Drive Unit (HRDU)
- 3.1.3.2 Remote Power Supply Unit ( RPSU)
- 3.1.3.3 Remote Optic(R OPTIC)
- 3.1.3.4 Remote Central Processor Unit (RCPU)
- 3.1.4 Bottom of HROU
- 3.1.4.1 Functions
- 3.1 HROU (High power Remote Optic Unit)
- Section4 System Installation
Figure 14. Procedures of installation
4.1.4 HROU components
HROU has the following components:
No. Unit Description Remark
Common Part
Enclosure Including Wall mounting bracket 1EA
RCPU - 1EA
R_OPTIC With SC/ACP adaptor(only HMRU) 1EA,optional
RPSU AC 110/220V or DC -48V 1EA
FAN UNIT 2 FANs is inside 1EA
CU_1
Combine TX signals from 5 HRDUs; Distribute RX
signals to 5 HRDUs;
Furthermore, there is reserved HRDU slot to support
2600LTE
ANT1
CU_2
Combine TX signals from 2 HRDU ;Distribute RX
signals to 2 HRDUs of low frequency under 1GHz
Combine TX signals from 2 HRDUs; Distribute RX
signals to 2 HRDUs of high frequency over 1GHz
ANT1 and
ANT2
Power Cable1 - MS Connector with 4 hole(AC and DC) 1EA, HMRU
Confidential & Proprietary 30/44