User's Manual
Table Of Contents
- Section1 Safety & Certification Notice
- Section2 System Overview
- Section3 System configuration and Functions
- 3.1 HROU (High power Remote Optic Unit)
- 3.1.1 Specifications of HROU
- 3.1.2 Block Diagram of HROU
- 3.1.2.1 HMRU block diagram
- 3.1.2.2 HROU inner look
- 3.1.2.3 HROU part list
- 3.1.3 Function by unit
- 3.1.3.1 High Remote Drive Unit (HRDU)
- 3.1.3.2 Remote Power Supply Unit ( RPSU)
- 3.1.3.3 Remote Optic(R OPTIC)
- 3.1.3.4 Remote Central Processor Unit (RCPU)
- 3.1.4 Bottom of HROU
- 3.1.4.1 Functions
- 3.1 HROU (High power Remote Optic Unit)
- Section4 System Installation
POWER IN
POWER SWITCH
FAN CON
Figure 8. DC-DC RPSU Outer Look
Functions:
Providing a circuit breaker to turn AC power ON/OFF
Providing DC power each HRDU
Providing DC power and signal to FAN tray
LED indicators for showing alarm staus of PSU
Caution
DOUBLE POLE/NEUTRAL FUSING
3.1.3.3 Remote Optic(R OPTIC)
Remote Optic converts optical signals into RF signals and performs vice versa. It also has internal ATT for
optical compensation to compensate for optical cable loss. It provides two path in pairs(TX/RX) to
transport RF signal to ARUs
Confidential & Proprietary 22/44