User's Manual

Confidential & Proprietary 2/49

REVISION HISTORY

Version Issue Date Section Description

V 1.0 September 01, 2018 All Original

Preface

Technicians using these manuals should have completed the SOLiD Certification Program.

SOLiD also recommends technicians be familiar with the concepts of fiber optic cabling,

networking and wireless communication technologies, and SNMP. We further recommend

training programs offered through CIBET (Certified In Building Engineering Technologist) and

BICSI (Building Industry Consulting Service International).

This manual is written and produced by SOLiD and printed in the USA. All rights are reserved

private to SOLiD and should not be modified, used, copied, reproduced or disclosed in whole or

in part without the written consent of SOLiD.

Technical Support

SOLiD serial numbers must be available to authorize technical support and/or to establish a

return authorization for defective units. The serial numbers are located on the back of the unit,

as well as on the box in which they were delivered. Additional support information may be

obtained by accessing the SOLiD Tehcnology, Inc. website at www.solid.co.kr