User's Manual

C
onfidential & Proprietary
MC Connector
numbering
Lug Naming
AC
A AC_H
B AC_N
C GND
Check if the connection is the same as one seen in the table above and make sure to turn the
power ON.
5.3.3 Optical Cabling
ROU makes optical-
electronic conversion of TX signals from upper ODU and OEU and
electronic-
optical conversion of RX signals. ROU has one optical module in it. As WDM is
installed in the R_OPTIC module, two pieces of wavelength (TX:1310nm, RX:1550nm) can be
sent/received with one optical core at the same time. ROU has SC/APC of
For optical adaptor, SC/APC type can be used. To prevent the optical access part from being
marred with dirt, it should be covered with a cap during move. When devices are connected
through optical cables, you need to clear them using
onfidential & Proprietary
89/139
Lug Naming
RPSU Terminal naming
DC AC DC
-48V AC-H -48V
GND AC-N
IN_GND
DC NC FG FG
Check if the connection is the same as one seen in the table above and make sure to turn the
electronic conversion of TX signals from upper ODU and OEU and
optical conversion of RX signals. ROU has one optical module in it. As WDM is
installed in the R_OPTIC module, two pieces of wavelength (TX:1310nm, RX:1550nm) can be
sent/received with one optical core at the same time. ROU has SC/APC of
optical adaptor type.
For optical adaptor, SC/APC type can be used. To prevent the optical access part from being
marred with dirt, it should be covered with a cap during move. When devices are connected
through optical cables, you need to clear them using
alcohocol to remove dirt.
Remark
IN_GND
Check if the connection is the same as one seen in the table above and make sure to turn the
electronic conversion of TX signals from upper ODU and OEU and
makes
optical conversion of RX signals. ROU has one optical module in it. As WDM is
installed in the R_OPTIC module, two pieces of wavelength (TX:1310nm, RX:1550nm) can be
optical adaptor type.
For optical adaptor, SC/APC type can be used. To prevent the optical access part from being
marred with dirt, it should be covered with a cap during move. When devices are connected