User's Manual

C
onfidential & Proprietary
ROU component
ROU has the following components:
No. Unit
Common Part
Enclosure
RCPU
R_OPTIC
RPSU
Multi-
Plexer
Power Cable
Optional Part RDU+BPF
Basically, the common part of ROU should have an enclosure and it is equipped with RCPU to
inquire and control state of each module, R_OPTIC to make both of electronic
optical-
electronic conversions, RPSU to supply power for ROU and a Multi
multiple TX/RX signals through one antenna. It should have Power Cable for external rectifier or
onfidential & Proprietary
87/139
ROU has the following components:
Description
Including Rack & Wall cradle
-
With SC/ACP adaptor
Alternative DC-48V or AC 120V
Plexer
-
Power Cable
-
MS Connector with 3 hole to AC 120 plug(AC)
- MS Connector with 2 lug termination(DC)
800PS,800PS+900I+Paging,850C,850C+700PS,
1900P+ AWS-1 RDU, VHF+UHF(NO BPF),
850C+700LTEC, 700LTEF+850C
700LTEF SISO RDU, 700LTEF SISO RDU
Basically, the common part of ROU should have an enclosure and it is equipped with RCPU to
inquire and control state of each module, R_OPTIC to make both of electronic
electronic conversions, RPSU to supply power for ROU and a Multi
-
Ple
multiple TX/RX signals through one antenna. It should have Power Cable for external rectifier or
Remark
1EA
1EA
1EA
1EA
1EA
MS Connector with 3 hole to AC 120 plug(AC)
800PS,800PS+900I+Paging,850C,850C+700PS,
Up to 3EA to
be inserted
Basically, the common part of ROU should have an enclosure and it is equipped with RCPU to
inquire and control state of each module, R_OPTIC to make both of electronic
-optical and
Ple
xer to help share
multiple TX/RX signals through one antenna. It should have Power Cable for external rectifier or