User's Manual

C
onfidential & Proprietary
How to install RDU
800PS+900I+PA
The following components are required:
No.
1
RDU 800PS+900I+PA
2
800PS+900I+PA BPF
3
800PS+900I+PA TX RF CABLE
4
800PS+900I+PA RX RF CABLE
Combine ① RDU
800PS+900I+PA
the unit to combine with BPF.)
Insert the combined ②
800PS+900I+PA
Combination point of ③
800PS+900I+PA
Multiplexer Port naming
onfidential & Proprietary
95/139
800PS+900I+PA
Ass’y
The following components are required:
Unit Description
RDU 800PS+900I+PA
RF Module
800PS+900I+PA BPF
BPF
800PS+900I+PA TX RF CABLE
SMA(M) to SMA(M),
460
800PS+900I+PA RX RF CABLE
SMA(M) to SMA(M),
380
800PS+900I+PA
with 800PS+900I+PA
BPF (As it is a plug type, push
the unit to combine with BPF.)
800PS+900I+PA
BPF Ass’y into any slot of ROU.
800PS+900I+PA
BPF Ass’y of the multiplexer
Interface Point
800PS+900I+PA RDU 800PS+900I+PA BPF
Remark
460
mm
380
mm
BPF (As it is a plug type, push
BPF Ass’y into any slot of ROU.
Remark