User's Manual
Confidential&Proprietary12/115 SC‐DAS
“Onlyqualifiedpersonnel are allowed tohandlethisunit.Read and obeyallthewarning
labelsattachedinthisusermanual”
Any personnel involved in installation, operation or service of the SOLiD Technology repeaters
mustunderstandandobeythefollowing:
‐ Obey all general and regional installation and safety regulations relating to work on high voltage
installations, as well as regulations covering correct use of tools and personal protective
equipment.
‐
The power supply unit in repeaters contains dangerous voltage levels which can cause electric
shock.Switchthemains off prior toanyworkinsuch a repeater. Any local regulations are tobe
followedwhenservicingrepeaters.
‐ The repeater cover (door) should be securely fastened in open position(with a cord),
during
outdoor work in order to prevent door from slamming due to wind (which couldcause bodily
harmordamage).
‐Usethisunitonlyforthepurposespecifiedbythemanufacturer.Donotcarryoutanymodifications
or replace any parts which are not sold or recommended by the
manufacturer. This could cause
fire,electricshockorotherinjuries.
‐ Repeaters generate radio signals and thereby give rise to electromagnetic fields that may be
hazardoustoanypersonintheimmediateproximityoftherepeaterandtherepeaterantennas
foranextendedperiodoftime.
‐Duetopowerdissipation,
thisrepeatermayreachaveryhightemperature.Donotoperatethisunit
onorclosetoflammablematerials.
‐Donotuseanysolvents,chemicals,orcleaningsolutionscontainingalcohol,ammonia,orabrasives.
‐Certification
z FCC:This equipmentcomplies withthe applicablesectionsofTitle 47CFR Parts15,22,24
and
90
z UL/CUL:ThisequipmentcomplieswithULandCUL1950‐1Standardforsafetyforinformation
technologyequipment,includingelectricalbusinessequipment
z FDA/CDRH: Thisequipmentuses a Class 1 LASER according to FDA/CDRH Rules.This product
conformstoallapplicablestandardsof21CFRChapter1,SubchaperJ,Part
1040
‐For PLUGGABLE EQUIPMENT, the socket‐outlet shall be installed near the equipment and shall be
easilyaccessible.