User's Manual
Confidential&Proprietary104/115 SC‐DAS
ThetablebelowshowsmaximallyallowableCompositePowerlevelsthatcanbesetperband:
ROUBand Powerthatcanbe
maximallyset
Settingrange Remark
700LTE 24dBm 0~24dBm ARU700LTE+AWS‐1
700LTE(MIMO) 28dBm 0~28dBm MRU700LTE+AWS‐1
850Cellular 24dBm 0~24dBm MRU1900PCS+850C
1900PCS
28dBm 0~28dBm MRU1900PCS+850C
31dBm 0~31dBm MRU1900PCS
AWS‐1 28dBm 0~28dBm ARU700LTE+AWS‐1
900I 26dBm 0~26dBm ARU900I+800I
800I 26dBm 0~26dBm ARU900I+800I
AGS function enables you to adjust output power as you like. While the AGS function is being
executed,theResultwindowshows"Processing"andthenaresultvalueisdisplayed.Therearethree
typesofresultsasfollows:
A. Success:TheAGSfunctionisnormallycompleted.
B. NotOpterateOPTICComp:Optic
Compisnotexecuted.
C. LackofATT:Thereisnoattenuationavailable.
Settheupper/lowerlimits.Thefollowingtableshowsrecommendedlimitsettings:
Item RecommendedLimit Remark
TXOUTPUTHIGHALM MaxCompositePower+1dB Alarm
TXOUTPUTLOWALM 0dBm Alarm
TXOUTPUTALC MaxCompositePower AutoLevelcontrol
TXOUTPUTSD MaxCompositePower+2dB Shutdown
RXALC‐45dBm
IfTXOUTPUTHIGHALMishigherthanasettingvalue,alarmswillbegenerated.
If TX OUTPUT LOW ALM is lower than a setting value, alarms will be generated. TX OUTPUT HIGH
ALM/LOWALMtendstoworkonlyaswarning.
Whenyouactivate(“ON”)TXOUTPUTALC,outputswillbe
restricteddependingonasettingoutput
value.
When you activate (“ON”) TX OUTPUT SD, output will be turned OFF once output power level
reaches the same as SDsetting value. Upon SD operation,check output level after 10 minutes and
thencheckthestatusagain.
Whenyouactivate(“ON”)RX
ALC,inputswillberestricteddependingonasettingvalue.
As described above, whennormal output level and alarm limit values are set, you need to check if
thevalueofMODULEFAILURELEDIndicatorisgreen.