User's Manual

Confidential & Proprietary 66/139
Figure 4.35 – AOR Rear Look
Item Description Remark
1. VHF/UHF & 700LTEF
TX IN
Terminal for receive the signal of TX from existing ROU
To/From
Existing
ROU
2. VHF/UHF & 700LTEF
RX OUT
Terminal for transmit the signal of RX to existing ROU
3. Power Port
Terminal for input either AC 110V or DC-48V as internal
PSU type
4. VHF/UHF TX OUT
700LTEF MIMO ANT
Terminal for radiate the signal of TX to TX Antenna
To/From
Antenna
5. VHF/UHF RX IN
700LTEF SISO ANT
Terminal for receive the signal of RX from RX Antenna
6.External Port Port for communicate with existing ROU
7.GND LUG PORT Terminal for system ground
POWER PORT
Power ports are used for power-supplying of -48V DC or 120V AC, and specific power
cable should be applied to each different types of ROU power supply (AC/DC or