User's Manual

Confidential & Proprietary 59/139
4.5 Add on V/UHF ROU
Add on ROU(forward naming“AOR) is connected existing ROU to service VHF/UHF and LTE
band. AOR should support either VHF/UHF or LTE RDU
AOR locates above or under of exisiting ROU. AOR receives TX signals from ROU and then
amplify these through High Power Amplifier, filter out of band signals and radiated to the TX
antenna port. When receiving RX signals through the RX antenna port, this unit filters out-of-
band signals and amplify with Low noise Amlifier and output power is connected existing ROU’s
RX port. External BPF should be located between TX/RX antenna and AOR’s IN/OUT ports
because the BPF rejects the strong broadcasting signal and etc
AOR body meets to NEMA4 degree.
Figure 4.32 – AOR Outer Looks
AOR is designed in a cabinet, and provides the following functions and features.
4.5.1 Specifications of AOR
Item Spec. Remark
Size(mm)
482.6(19“) x 258 x177, Including Bracket
Weight
11 Kg
Power consumption
78 W
228
mm
258
mm
Rack Mount
Bracket
420
mm
482.6m
m (19”)
177
mm
Wall Mount
Bracket