User's Manual

Confidential & Proprietary 94/139
How to install RDU 800PS+900I+PA Ass’y
The following components are required:
No. Unit Description Remark
1 RDU 800PS+900I+PA RF Module
2 800PS+900I+PA BPF BPF
3 800PS+900I+PA TX RF CABLE SMA(M) to SMA(M), 460mm
4 800PS+900I+PA RX RF CABLE SMA(M) to SMA(M), 380mm
Combine ① RDU
800PS+900I+PA with 800PS+900I+PA BPF (As it is a plug type, push
the unit to combine with BPF.)
Insert the combined ②
800PS+900I+PA BPF Ass’y into any slot of ROU.
Combination point of ③
800PS+900I+PA BPF Ass’y of the multiplexer
Multiplexer Port naming
Interface Point
Remark
800PS+900I+PA RDU 800PS+900I+PA BPF