User Manual
Table Of Contents
- 1. Introduction of Ranger Watch W-10
- Specification
- Keys
- Getting Started
- 2. System Setting
- 2.1 Language
- 2.2 Tones and vibration
- 2.3 Display
- 2.4 Theme
- Time setting
- Alarm setting
- 2.7 Unit
- 2.8 Auto Suspend
- 2.9 Data Recording
- 2.10 Initial Setup：
- 2.11 Compass Calibration
- 2.12 User profile
- 3. Sport Setting
- 3.1 Change Sport Mode
- 3.2 Run setting
- 3.2.1 Data Fields
- Run Alerts
- 3.2.2.1 Cycle Alert: Time Alert、Distance Alert、and Calories Alert
- 3.2.2.2 Alert with upper limit and lower limit – Cadence Alert, Speed Alert, HR Alert
- 3.2.2.3 Run/Walk Alert
- 3.2.3 Auto Lap
- 3.2.4 Auto Pause
- 3.2.5 Auto Scroll
- 3.2.6 Heart Rate Monitor
- 3.2.7 ANT+ Foot Pod
- Calibrate Step Distance
- 3.2.9 Workouts
- 3.2.9.1 Interval Workouts
- 3.2.9.2 Custom Workout
- 3.3 Bike Setting
- 3.3.1 Bike Details
- 3.3.2 Speed / Cadence
- 3.3.3 Data Fields
- Bike Alert
- 3.3.4.1 Cycle Alert: Time Alert、Distance Alert、and Calories Alert
- 3.3.4.2 Alert with upper limit and lower limit – Cadence Alert, Pace Alert, HR Alert
- Auto Lap
- Auto Pause
- Auto Scroll
- Heart Rate Monitor
- Other Bikes
- Workouts
- Pace/Speed
- Countdown Timer
- Start Bike sport / training
- 3.4 Other (Sport) Settings
- 3.5 Outdoor Swim
- 3.6 Indoor Swim
- 3.7 Multi Sport
- 4. Datalog
- 4.1 Read Datalog
- 4.2 Check summary for each sport mode
- 4.3 Check Memory Details
- 4.4 SHOU-orbit website
- GPS function
- 5.1 GPS ON/OFF
- 5.2 To mark position
- 5.3 Guiding by GPS to the stored location.
- 5.4 Edit or delete the stored location
- 5.5 Back to Start
- 5.6 Stop Nanigation
- 5.7 Check GPS Satellites status
- 6. Bluetooth
- 7. Notification
- 7.1 Features
- 7.2 Operation procedure
- 8. Tempo Meter
- 9. Update Firmware (Operation System)
- 9.1 Download the new version of Firmware
- 9.2 Update Firmware (Operation System)
- 10. Important FCC notice:
3. Select the GPS number for the interested location.
4. Press ▲、▼ key to move to ｢Save｣ icon, and press [ENTER] key to save the GPS data of
the marked location.
★Note： It is recommended that the data in the fields of location should not been
modified, unless the user know the exact GPS information. Otherwise the marked
location will be changed.
To mark the location with known GPS data：
As you have got the GPS data for the location that you want to mark, you can do it with
the following procedure.
1. Press〔MODE〕key to menu page, select “GPS”, then select “Location
Manager”
2. Input the GPS data to the fields of location.
3. Press ▲、▼ key to move to ｢Save｣ icon, and press [ENTER] key to save the GPS data of
the marked location.