User Manual

Status｣Bluetooth Enable ｢Yes｣, then main page will show｢ ｣ that means the
Bluetooth is enabled.
2. Press 〔MODE〕key to menu pageselect｢settings｣enter｢Run Settings｣。(If the
sport is ｢Bike｣, then please select｢Bike Setting｣;If the sport is ｢outdoor swim｣,
then please select｢Swim Setting｣，If the sport is ｢Other｣, then please select｢Other
Setting｣.)
3. Select｢Heart Rate｣, and press 〔Enter〕key to enter Heart Rate page.
4. Select ｢BLE HR｣, and press 〔Enter〕key to enter BLE Heart Rate page.
5. BLE HR enable? Set as ｢Yes｣, and move to ｢Scan｣ and press〔ENTER〕key.
6. As Ranger Watch find Bluetooth HRM，it will show the BLE HR ID on the screen.
7. Select the BLE ID, and press〔ENTER〕 keySelect ｢More｣Select ｢Connect｣.
8. As Ranger Watch pair with BLE HRM successfully, the screen will show & at
status column。
Remark：
1. If Ranger Watch can’t pair and connect with the BLE HR, please renew the battery
pack with BLE HRM.