Soundscape Mixer Reference Guide

Soundscape Mixpander
Page 94 of 109
When all the required passwords have been entered, click the “Save” button to enable them and
exit the window. If you click “Cancel” a dialog box will require confirmation that you wish to
cancel the password input:
Click “Yes” to close the window, or “No” to make further corrections.
The SSL Soundscape Mixer will be deactivated and the following warning message will be
displayed whenever an invalid password has been entered and the corresponding mixer element
is present in the current mixer configuration:
NOTE:Thepasswordsonlyusenumbers0to9andlettersAtoF.
NOTE: If  you have purchased a password for one single unit, the corresponding softwa re module
willbeenabledforallthehardwareunitsinthe
system,i.e.,foralltheSoundscapeaudiocardsused
by the SSL Soundscape Mixer. The password should only  beentered for the unit it was generated
for,withthecorrespondingpasswordfortheotherunit(s)settothedefault“000000000000”.
Ignore Incoming Sample Rate Indication
When this option is selected, the incoming Sample Rate indication is ignored, and the currently
selected Sample Rate is maintained.
This is useful if the Master Clock source being used transmits an incorrect Sample Rate indication.