User Guide

28 29
Fusion User Guide Fusion User Guide
Appendix FAppendix E
Changing the fuse from 230V to 115V
1. Remove the IEC power cable from the IEC socket.
2. Remove the fastening by leveraging a flat-head screwdriver in the slot at the top of the fuse panel.
3. Remove the fuse cartridge, then remove both 0.5A fuses.
4. Re-orientate the fuse cartridge 180 degrees and place the new 1A fuses in the vacant slots on the cartidge.
5. Place the cartidge back in the holder it so that the 115V value is displayed through the slot in the fastening. Re-seal the
fastening, reconnect the IEC power cable, and switch the unit on.
Appendix F - Recall Sheet