User Manual

-6-

LMF and HMF Sections

The LMF band has a swept frequency control between 100Hz and

1.1KHz. The HMF band is also a swept frequency control between

400Hz and 6KHz. Each section has a variable ‘Q’ control (see FO-

CUS section). The gain pots are continuous, with indents at the 12

o’clock position (0dB) and allow for ±9dB of gain (again see FOCUS

section).

FOCUS

™

Switches

Focus mode allows the user to ‘hone in’ on problem frequencies

or specic frequencies they want to accentuate using the LMF and

HMF sections. Pressing the ‘Focus’ switch in, automatically narrows

the chosen Q setting further and increases the range of gain

available beyond the normal +/-9 dB operation. This transforms this

sweet sounding, musical SSL EQ into a more surgical tool.

HPF (High Pass Filter)

The High Pass Filter section is an 18dB/Octave stereo lter with

switched frequency options at 30 Hz, 40 Hz and 50 Hz. The OFF

setting bypasses the lter circuit completely

TRIM

The stereo TRIM control provides an output level trim adjustment

with an indent at the 12 o’clock position (0dB) and allows for ±12dB

of stereo gain trim. This is useful to adjust the module output level

to compensate for signicant gain increases in the EQ sections to

avoid overloading devices later in the processing signal chain.

4 5