User's Manual

Live Tutorial

SSL UF8 User Guide

Tutorial

This section guides you through using UF8 with Live.

V-Pot

At the top of each strip is the V-Pot (virtual pot). The function of the V-Pot varies, depending on which V-Pot assignment mode is

currently active (Pan, Send etc) but is typically used for tasks such as controlling Pan position, Send levels, Plug-in parameters or

scrolling through parameter options/lists.

The V-Pot has a push function, which is typically used for defaulting the position of the

parameter being controlled.

100 mm Motorised Fader

Motorised, touch-sensitive faders provide physical control of your Live tracks and are great for

balancing mix levels and writing automation.

Touching a single fader will cause the LowLCD area to display a fader dB

readout, instead of the V-Pot parameter readout.

Solo, Cut & Sel (Select)

Each strip contains SOLO, CUT and SEL keys corresponding to the solo, mute and select

features for each track in Live.

Selection Mode

The primary purpose of the NORM and REC keys in the SELECTION MODE section is to determine the behaviour of the SEL keys.

NORM - The SEL keys select a track in Live.

REC - The SEL keys act as record-arm keys.

AUTO - Disabled. This key only applies for Pro Tools profiles.

The secondary labels CLEAR, ALL and ZERO do not apply for Live's UF8 integration.