User Manual

Duende Native User Guide Page 57
R
EV Menu
M
enu
P
arameter
R
ange
D
escription
Reverb Master Controls
PreDelay 0 - 1500ms Adds a Pre-Delay to the reverb tail, moving the Triangle right.
Rev Level –∞ to 0dB Adjusts the level of the reverb tail
Rev Time Varies
Determines the time for the reverb level to fall below 60dB
(RT 60). Dependant on the Size, Shape, Attack and Algorithm.
Reverb
sub menus
Body
Size 0 - 60m
Adjusts room size by altering the reverb delay structure, the
diffusion engine and the complexity approximation.
IMPORTANT: Changing the Size can result in audible artefacts.
Density 0 - 100%
Adjusts the density in the diffusion and refraction engine and
complexity approximation. Higher values smoothen the reverb
tail and individual ‘refractions’ or ringing echoes disappear.
Definition 0 - 100%
Adds defined and randomly modulated reflections to the
beginning of the reverb tail. Can add clarity but may reduce
density. In Ultra Plate, Definition also modulates the Density in
relation to Input Level to create a more natural decay.
Crossfeed 0 - 100%
X-Verb has separate diffusion engines for left and right. Crossfeed
introduces the left input to the right channel and vice versa,
reducing the stereo image but adding the impression of distance.
Envelope
Shape 0 - 255
Alters the Shape of the Reverb Triangle. At higher values the
reverb build up phase (Attack) becomes longer, while the tail fade
out phase becomes shorter.
Attack 0 - 255
Expands the time of the Attack. At higher values the reverb build
up time can take up to 700 ms. Note that when Shape is set to 0,
Attack is inactive.
Rev Mode -9 to +9
Allows less natural-sounding reverb. At 0, reverb sounds most
natural – positive values compress tail. LF energy may lead to
artifacts – lower Input level or set RevMode to 0 to eliminate.
Modulate
Cho Rate 0-4Hz Adds Chorus to the tail to thicken and smoothen the reverb.
Cho Depth 0-100% Adjusts the modulation depth of the Chorus.
Lifelyness 0-48
Adds natural sounding random time modulation to refractions in
Diffusion engine. For Ultra Plate, adds modulation to Chorus
Floatation 0-22ms
Determines the maximum range of ‘Lifelyness’ time fluctuation.
Not available in the Ultra Plate Algorithms.
Freq/Time Controls
Time (Low,
Mid, High)
0.1-4
Factor for the RevTime multiplier of each band. Turn clockwise to
lengthen. Since high frequencies have the least energy the HF
default factor is 0.2.
XOver
(Low, High)
25Hz -
24kHz
Adjusts the crossover frequency between Low and Mid bands,
and between Mid and High bands.
Filters Controls
Freq
25Hz -
24kHz
Sets filter frequency for Low and High filters
Shelve Gain –∞ to 0dB Sets gain reduction for Low and High filters
In/Out In/Out Switches each filter in and out of circuit.