User Manual

Duende Native User Guide Page 47
8. X-Verb
X-Verb is a versatile and comprehensive studio grade reverberation plug-in which delivers the density, warmth, depth and
stunning detail usually only found in top-end hardware reverb processors. The primary parameters provide conventional
reverb manipulation, while nearly 100 detail parameters allow an exceptional level of fine-tuning. Click on the blue boxes to
be taken to fuller descriptions of their contents.
INTERFACE OVERVIEW
To press a switch in a plug-in, simply click on it. The active state is sometimes indicated by a
green surround (shown left), and sometimes indicated by a shadow at the top rather than
the bottom, (shown right).
To turn a knob, click on it, and drag it up or down. If your mouse has a scroll wheel, you can also turn knobs by
hovering over them and turning the scroll wheel. The value for each parameter is displayed in the centre of the
knob.
To move any control slowly for fine adjustments, hold
Shift on your keyboard whilst turning. To reset a knob to its default value,
click on it whilst holding Ctrl (Windows) or ⌘ (Macintosh).
Plug-in Bypass
The In/Out switch located above the Input section provides an internal plug-in bypass. This allows for smoother
In/Out comparisons by avoiding the latency issues associated with the host application’s Bypass function. The
button must be ‘lit’ for the compressor to be in circuit (as shown left).
Automation
Every plug-in parameter can be automated in host applications which support automation. The method for recording and
editing automation varies from host to host. For specific instructions on using automation within the host, consult the host
application documentation.
I
nternal bypass for smooth
in/out comparisons
Input level metering
and control
Output metering
and control
Compare or mix
A and B settings
Edit primary
parameters
Create and select presets
Silence
reverb tail
Above the main plug-in window is
a set of controls which are specific
to your host application.
Please refer to your host
application’s user guide for
guidelines on using these controls
Select
A
lgorithm
Adjust Early Reflections,
Reverb and Dry mix
Adjust
Image
Scroll/Zoom display
Fine controls for adjusting
selected paramters
Select parameter set for
display and fine controls
Interactive reverb graph
Click + Drag
inactive active