User Manual

Page 16 Duende Native User Guide
APPLYING ACTIVATION CODES TO YOUR PROFILE
CD Activation Codes
If you bought your plug-ins on CD, you must apply your activation codes to your profile before you can activate them. To do
this, log into your profile then go to www.solidstatelogic.com/duendenativepacks and follow the on-screen instructions.
To locate your activation code, open your CD sleeve and you will find it on a sticker on the left-hand panel. It is 18 to 20
characters long, in the format: XXXXX–XXXXX–XXX–XXXXX (note that the third set of digits may be three, four or five digits).
Free Demo Activation Codes
Before you can activate any free demos you have downloaded, you need to apply them to your SSL Profile. To do this, log
into the SSL website, as described on Page 18. Then hover over the PRODUCTS tab (at the top of the page) followed by the
MUSIC entry in the drop-down which appears, and click on Duende Native in the second drop-down which appears. Select
the Free Demo tab to be taken to the page shown below. Alternatively, just click on the page displayed here in the pdf:
Read the on-screen instructions and click on the I Want A Demo button. This will send free demo licences to your Profile.
Plug-in Expiration
When your plug-in demo period comes to an end, the plug-in will stop working. When this occurs on
Macintosh the plug-in will appear glassed over – as shown left for the Stereo Bus Compressor.
When this happens, you will be eligible for another 7 day free demo after 30 days. Go to the web page
shown above for full details of further free demo licences.
Alternatively, you can re-activate your plug-ins permanently by going to the MySSL area of the SSL
website and purchasing full licences, as described on the previous and following pages.