User Manual
Table Of Contents
- Table of Contents
- Introduction
- 1. Software Setup
- 2. EQ & Dynamics Channel Strip
- 3. Stereo Bus Compressor
- 4. X-Comp
- 5. X-EQ
- 6. Vocalstrip
- 7. Drumstrip
- 8. X-Verb
- Appendix: Cross-grade
Duende Native User Guide Page 11
DOWNLOADING THE SOFTWARE
I
f you do not have a Duende CD, you can download the software from www.solidstatelogic.com
.
Note that you do not need
t
o buy plug-ins to download , though you will need to register on the SSL website before you can use them. To use them for
m
ore than one month, you will need to buy authorisation, as described on Page 19.
To download the software, go to www.solidstatelogic.com
, hover over the PRODUCTS tab (at the top of the page) followed
by the MUSIC entry in the drop-down which appears, and click on Duende Native in the second drop-down which appears.
Select the Downloads tab to be taken to the page shown below. Alternatively, just click on the page displayed here in the pdf:
There are three download boxes, for Macintosh, 32-bit Windows machines and 64-bit Windows machines. Click on the
Download label within the appropriate download box, and the download will start automatically.
It is important that Windows users install the correct software version – please refer to your PC’s User Guide to establish
which of the following host/OS permutations applies to you:
32-bit Windows, 32-bit Host: 32-bit installer required (the 64-bit installer will not run on 32-bit Windows);
64-bit Windows, 32-bit Host: 32-bit installer required (the installer detects that Windows is 64-bit and installs 64-bit
CodeMeter, but installs 32-bit plug-ins – see next page for more explanation);
64-bit Windows, 64-bit Host: 64-bit installer required;
64-bit Windows, Separate 32-bit and 64-bit Hosts: both installers required!
Problems Downloading?
If the download is very slow, click on the drop-down box at the bottom of the download box, and select
a different location number (1, 2, 3 or 4) within your geographical area (see right).
If the download doesn’t work, check that your computer meets the system requirements on the
following page, and check that you have downloaded the correct version.
Note that the SSL website has a support FAQ section. Click here to be taken there…