Installation & Assembly

5
On the first pass, use light pressure to score the panel and set the path the knife will follow for
the second pass.
The second pass should be done with more pressure to cut through the panel, while making sure
the knife is following the score line of the first pass.
Caulking the Panels
In order to achieve the high performing R-values listed for Solexx; the two open ends of the
paneling must be filled with a ¼"(6mm) bead of clear 100% silicone caulking. We recommend
IS800 industrial grade silicone caulking. This product is not available in most retail stores but is
available through Adaptive Plastics. If you decide to purchase your caulking at your local
hardware store, we suggest using “GE Silicone II” or “Silicone II”. To see a caulking
demonstration video, go to www.adaptiveplastics.com/caulking-solexx