Use and Care Manual

10) Internal Pump Mode- The internal pump allows the unit to operate without having to empty the buck-
et. To install the Pump Drain Hose Kit, remove the drain cap on the back of the unit. Insert the included
gasket into the Drain Adapter, then force the Drain Hose onto the Drain Adapter and turn clockwise onto
the garden hose nozzle on the back of the unit as pictured below. (Drain adapter is included in storage
compartment on top of water bucket) Once securely installed, lead the Drain Hose to a nearby drain, sink
or out of a window up to 16’ in height from the base of the unit. Turn on the unit and press the PUMP
button to activate the internal pump.
CAUTION: PUMP MODE WILL ONLY OPERATE WITH A SOLEUS DRAIN HOSE AND DRAIN
ADAPTER; DO NOT USE A GARDEN HOSE IN PUMP MODE OR ANY OTHER TUBING.
OPERATING INSTRUCTIONS