PH5 Series Portable Air Conditioner with Heat Pump Operating Instructions 3092402 PH5(S) SERIES © 2010 Soleus Air International
Thank you for choosing a Soleus Air PH5 Series Portable Air Conditioner with Heat Pump. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner. For your own records, please attach a copy of your sales receipt to this manual.
PACKAGE CONTENTS Portable Air Conditioner Exhaust Hose (1) Hose Adapter (1) Window Kit Adapter (1) Remote Control AAA Batteries (2) Window Kit - 3 Sliding Panels Air Outlet Covers (1) Owner’s Manual SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • The operational ambient temperature is between 23°F ~ 109°F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.
PRODUCT DIAGRAM Louvers Control Panel and LED display Air Filter Compartment and Air Intake Casters Remote Control and Holder Power Cord Wrap Exhaust Outlet Air Intake Drain Plug 5
PARTS & ASSEMBLY PARTS EXHAUST HOSE WINDOW KIT HOSE HOSE ADAPTER ADAPTER EXHAUST HOSE WINDOW KIT ADAPTER WINDOW KIT ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air (or cold air in heat mode) out of the room to complete the air exchange. When the unit is operating in fan mode, no outdoor air exchange takes place.
VENTING KIT INSTALLATION NOTE: FOR THE PH5 THERE IS ONLY ONE EXHAUST HOSE TO INSTALL NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and images show general directions for Soleus Air hose portable air conditioners.
WINDOW KIT ASSEMBLY 1.Parts: A) 2 Track Screws B) 2 Wing Nuts C1 & C2) 2 Hose Panels, one Exhaust Hose Openings D) 1 Sliding Track Panel 5. Next, take the other Hose Panel (C2) and connect it to Hose Panel (C1) by placing the Sliding Track Panel (D) over the Track Screw (A) on Hose Panel (C2). 2. Assembly: First, take the Track Screws (A) and screw one 3. Next, take the Wing Nuts (B) and tighten them around each of the Track Screws (A).
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL & LED CONTROL DISPLAY CONTROL PANEL TIMER TIME/TEMP DECREASE TIME/TEMP INCREASE FAN SPEED POWER MODE LED CONTROL DISPLAY LED CONTROL DISPLAY AUTO A/C DEHUM.
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off. 2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode, Air Conditioner, Dehumidifier, Fan only, and Heater mode.
Heating Mode 1) Install the exhaust hose and window kit properly (see pages 7 & 8 ). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the POWER button on the control panel. 4) Press the MODE button until the “ “ icon appears on the control panel display. 5) Press the ▼or ▲ buttons until the desired room temperature appears on the control panel display. The ° ° ° ° temperature ranges from 61 F - 88 F (16 C - 31 C). 6) Select the fan speed by pressing the FAN button.
° ° ° 68 F to 80 F. And Air Conditioner mode when the room temperature is above 80 F. Heating Mode when ° the room temperature is below 68 F . Sleep Mode (This mode can only be selected when using the Remote control ) 1) To set Sleep mode, make sure the unit is in Air Conditioner mode or Heating mode. 2) Press the SLEEP Button on the remote control. The “ ” icon appears on the control panel display. 3) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
OPERATING THE UNIT USING THE REMOTE CONTROL REMOTE CONTROL LCD DISPLAY MODE BUTTON FAN SPEED POWER BUTTON TEMP SETTING SWING (LOUVER OSCILLATION) TIMER ON SLEEP BUTTON HOUR SELECTER TIMER OFF MINUTE SELECTER * Remote color may differ from the image above.
REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER (I/O) button once to manually turn the unit on. Press the Power button once more to turn the unit off. When you press the POWER button the upper right square on the remote control LED Display will light up. When in Air Conditioner and Auto mode, the selected temperature will appear on the remote control display. When the unit is in Fan mode and Dehumidifier mode you will see the “- -” icon instead of the set temperature.
MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volume may reduce. It is recommended to clean the filter once every two weeks or as needed. 1) Remove the filter from the filter compartment on the front and back of the unit. 2) Wash the air filter by immersing it gently into warm water with a neutral detergent.
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air PH5 Series Portable Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc.
