Installation Instructions

OPERATING INSTRUCTIONS
CONTROL PANEL OPERATION
1) Power ON/OFF - Press the POWER button once to manually turn the unit on. Press the POWER button
once more to turn the unit off.
2) Mode Button - Press the MODE button to choose between FAN and DEHUMDIFIER modes.
3) Humidity + and - Buttons - When in Dehumidifier Mode, press the + or - buttons to choose the desired
relative humidity in the room. Each press of the button will change the desired room humidity by 1%. Hold
the + or - buttons and the humidity will change by 5%. The room humidity is selectable from 30%-90% or
Continuous (CO). The unit will cycle on and off to maintain the humidity level chosen on the digital dis-
play. If you want the dehumidifier to operate continuously regardless of the room humidity, press the - but-
ton until you see COon the digital display. This will enable continuous operation and COdisplay on
the control panel.
4) Fan Speed Button- Press the FAN SPEED Button to cycle through the different fan speeds: High, Medi-
um, and Low. The fan speed can be visually distinguished by the fan speed icon on the control panel. For
fast dehumidification, choose High. For moderate dehumidification, choose Medium. For quiet operation,
choose Low.
5) Drain Button - The dehumidifier will automatically drain when the internal tank is full during normal op-
eration. Prior to transporting or storing the unit, press the DRAIN button to remove all remaining water for
the internal holding tank. When the Drain button is pressed, the pump will purge water for 40 seconds. (Be
sure the Drain Tube is installed prior to pressing the Drain Button)
6) Time Button - The Time button can be used to set the Date, Time, and Timer.
Press the Time button to cycle through: Year—Month—Day—Hour—Minutes—Timer. Press the + or - but-
tons to increase or decrease each setting.
Set Date
Year: Press the Time button until Year appears and use the + or - buttons to increase or decrease the Year.
Month: Press the Time button until Month appears and use the + or - buttons to increase or decrease the
Month.
Day: Press the Time button until Day appears and use the + or - buttons to increase or decrease the Day.
Set Time
Hour: Press the Time button until Hour appears. Use the + or - buttons to increase or decrease the Hour.
Minute: Press the Time button until Minutes appear. Use the + or - buttons increase or decrease the Minutes.