Installation Instructions

Problem Possible Causes Solutions
Water on the floor Drain Tube is not connected. Install the Drain Tube onto the Drain Port on the back of the
unit. See the PRODUCT SETUP Section on Page 6.
Drain Tube connection may be
loose.
Check the Drain Tube connection. See the PRODUCT SET-
UP Section on Page 6.
Unit will not turn on The fuse is blown / circuit break-
er is tripped.
Check the house fuse / circuit breaker box and replace fuse or
reset breaker.
Unit is on, but fan is not
running
Dehumidifier has reached the
humidity level set on the control
panel.
The dehumidifier automatically turns off when the set humid-
ity level is met. To continue operation, reduce humidity set-
ting or activate Continuous Mode.
Power Failure. There is a protective time delay (up to 3 min.) to prevent trip-
ping of the compressor overload. For this reason, the unit may
not start normal dehumidification for 3 min. after it is pow-
ered back on.
TROUBLESHOOTING
For any questions or Technical Support, please call
customer service 877-665-9765