Specification Sheet

35
TRC, TRCe, TRCV, TRCVe Freight Policy
The Pro-Vent group is categorized into three sub-groups: A, B and C.
A GROUP includes all products that are small enough to be shipped by parcel carrier and will be shipped
freight prepaid with an order of $750 net or higher. If order is less than $750 net then freight will be added
according to zone pricing as outlined below. *These products are identified by the following symbol:
B GROUP includes the majority of the Pro-Vent products and will have freight added based on destination
zone. Please refer to the attached map to determine zone. Any order over $7500 net order will be freight
prepaid. Each zone has an additional percentage of list order price to add on for freight costs. The
breakdown of zones is as follows:
Zone 1: add 2.5% of list price
Zone 2: add 7% of list price
Zone 3: add 5.5% of list price
Zone 4: add 7% of list price
Zone 5: add 8% of list price
For any areas outside of the zones, such as Hawaii, Alaska and Puerto Rico, please contact our
customer service department for a freight quote.
C GROUP some of the Pro-Vent products are oversized and are not included in the general freight policy.
Freight charges for any of these products must be quoted per order, through the customer service
department.
*These products are shaded in grey boxes.
1
2
3
4
5
MODEL TRC, TRCe, TRCV, & TRCVe – LIGHT COMMERCIAL ERV FREIGHT
This freight policy applies ONLY to Models TRC, TRCe, TRCV, & TRCVe Freight for all other S&P Products
(Commercial or Residential) must be factored separately.
Zone 1: add 1% of list price
Zone 2: add 2% of list price
Zone 3: add 2% of list price
Zone 4: add 3% of list price
Zone 5: add 3% of list price
For any areas outside of the zones, such as Hawaii, Alaska and Puerto Rico, please contact our
customer service department for a freight quote.
Models TRC TRCe, TRCV, & TRCVe will have freight added based on destination zone up to 5 units,
for orders and/or quotes over 5 units S&P will provide a Freight Quote. Please refer to the map below to
determine zone. Each zone has an additional percentage of list order price to add on for freight costs. The
breakdown of zones is as follows:
How do I calculate Freight?
Order Example:(Texas zone 3)
TRC500-115 - List $ = $ 3363
SCO2-W - List $ = $ 670
Total List $ = $ 4033
Freight % = x .02
Freight Amount = $ 80.66
This freight policy cannot be used for projects created in the Optisizer2 Fan
Selection program or on any product not in this catalog.