Specification Sheet

ManualsBrandsSoler and Palau ManualsCommercial HVAC1 1/2 Horse Power 14.3 Sones Three Phase Sidewall Belt Drive Prop Fan

160

LINE OVERVIEW

S&P’s Belt Drive Sidewall Propeller Fan line is designed to exhaust or supply large volumes of air at relatively low static

pressures. With 3 levels of construction, the belt drive models are for use in a variety of applications for commercial,

industrial and agricultural buildings such as manufacturing and assembly plants, warehouses, parking garages, gymnasiums,

equipment rooms, distribution centers, foundries, boiler rooms, greenhouses and OEM applications. The direct drive models

provide general ventila tion for a wide variety of buildings and enclosed areas within buildings. Examples include

factories, assembly plants, warehouses, gymnasiums, garages, jails, machine

rooms and many others.

These Sidewall Propeller Fans are rated from 3,000 to 85,000 CFM with static

pressures to 1” w.g. Models range from 20 to 72”. A wide range of accessories are

available to meet any need or specication. See the below Model Comparison to

nd the right Belt Drive Sidewall Propeller Fan for your application.

Construction Level Model

Size

Range

Performance

Model Overview

On Page

G90 galvanized steel blades

bolted to an epoxy coated hub

LCE

LCS

20 to 60”

3,000 to 40,000 CFM

up to .625” w.g.

172

G90 galvanized steel blade

bolted to a welded, structural

steel hub plate

L2E

L2S

24 to 60”

5,000 to 47,000 CFM

up to 1” w.g.

173

G90 galvanized steel with

double 16 gauge laminations

bolted to a welded, structural

steel hub plate

L3E

L3S

42 to 72”

35,000 to 85,000 CFM

up to 1” w.g..

174

MODEL COMPARISON

MOUNTING ARRANGEMENT OPTIONS

Page Mounting Arrangement Description

161-162 Wall Housing

Heavy-gauge, all galvanized G-90 steel

housing provides a simple solution to installing

a fan and all required accessories in a rough

wall opening. It can be used in exhaust or

supply applications and in fan sizes 20 through

72 inch.

163-164

Filtered Wall

Housing

For installations where ltering is required.

Heavy-gauge, all galvanized G-90 steel ltered

wall housings are available in both supply and

exhaust congurations. They are available in

eight (8) sizes for fans ranging from size 20 to

60 inches. They are designed with the draw-

thru concept to achieve the highest lter and

fan efciencies.

165 Wall Collar

Heavy-gauge, all G-90 galvanized mounting

collar provides a simple solution to installing a

fan in a rough wall opening when a rear safety

guard is NOT required.

MODELS LCE/LCS, L2E/L2S, L3E/L3S

BELT DRIVE SIDEWALL PROPELLER FANS

Models LCE, LCS and

L2E are available in our

Quickship program. Most sizes

are available for next day or 10-

day shipping from stock.

GC_L FANS_0111 January 2011

Summary of content (24 pages)

PAGE 1
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS LINE OVERVIEW S&P’s Belt Drive Sidewall Propeller Fan line is designed to exhaust or supply large volumes of air at relatively low static pressures.
PAGE 2
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS WALL HOUSING MOUNTING OPTION This heavy-gauge, all galvanized G-90 steel housing provides a simple solution to installing a fan and all required accessories in a rough wall opening. It can be used in exhaust or supply applications and in fan sizes 20 through 72 inch. Depending on space and maintenance requirements, the wall housing may be installed inward or outwards of the building.
PAGE 3
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Wall Housing Standard Mounting Arrangements The most common mounting arrangement (below left) leaves a clean building exterior and allows access to the fan, motor and drives from inside the building. Additional bracing angle, rod or cable (field provided) should be used in addition to the mounting angles to support the fan and wall housing assembly.
PAGE 4
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS FILTERED WALL HOUSING MOUNTING OPTIONS Filtered wall housings are available in both supply and exhaust configurations. They are available in eight (8) sizes for fans ranging from size 20 to 60 inches. They are designed with the draw-thru concept to achieve the highest filter and fan efficiencies. Filtered Supply Filtered Exhaust Standard construction is galvanized steel.
PAGE 5
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS FILTERED WALL HOUSING MOUNTING OPTIONS Cont. Filtered Wall Housing Dimensions Filtered Supply Optional Rainhood (90 deg.
PAGE 6
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS WALL COLLAR MOUNTING OPTION The heavy-gauge, all G-90 galvanized mounting collar provides a simple solution to installing a fan in a rough wall opening when a rear safety guard is NOT required. A front wire guard, shutter, and/or rainhood can be attached to the front prepunched flanges. The wall collar can be used in exhaust or supply applications for all fan sizes.
PAGE 7
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS FOR MOUNTING ARRANGEMENTS Accessory or Option Safety Guards Safety Guards (Standard or Heavy-Duty Flat Guards) are strongly recommended to protect personnel from accidental injury and to prevent debris from entering the fan. OSHA approved guards are required in many installations including when the fans are within 7 feet of the floor or work/access area.
PAGE 8
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS FOR MOUNTING ARRANGEMENTS Cont. Safety Guards Safety guards are strongly recommended to protect personnel from accidental injury and to prevent debris from entering the fan. OSHA approved guards are required in many installations including when the fans are within 7 feet of the floor or work/access area.
PAGE 9
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS FOR MOUNTING ARRANGEMENTS Cont. Rainhoods or Weatherhoods Designed to provide additional weather protection by partially shielding the wall opening and should be used for all supply applications and whenever additional weather resistance is desired. The galvanized (aluminum optional) hood attaches to the wall housing or wall collar flanges. Field flashing and caulking will reduce moisture penetration.
PAGE 10
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS FOR MOUNTING ARRANGEMENTS Cont. Damper Types (Shutters) Heavy-Duty Galvanized Exhaust Motorized Shutter This damper has a flanged frame and is designed to fit the inside flanges of the optional wall housing or wall mounting collar. The frame and blades are constructed of galvanized steel and are rated to 3000 FPM with proper clearance as provided by all factory accessories.
PAGE 11
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS FOR MOUNTING ARRANGEMENTS Cont. Dimensions (Standard and Heavy-Duty Dampers) EXHAUST AIR FLOW 14" MAX 14" MAX B A 3" A 10" MAX 10" MAX MOTOR MOUNT MP-2781 MOTOR MOUNT MA-220 B B DETAIL #1 DETAIL #2 A A A SUPPLY AIR FLOW B 7" MAX A A B Fan Size A Sq. Size B Sq.
PAGE 12
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS ACCESSORIES & OPTIONS Electrical Accessories are available to simplify the installation and reduce the total project cost. Disconnect Switches can be shipped loose or factory mounted and wired (except explosion proof and two speed) in NEMA 1, 3R, 4X, or other enclosures. Two-speed and explosion proof disconnects are available but may be subject to more stringent code requirements.
PAGE 13
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS MODEL LC - CONSTRUCTION LEVEL 1 Application Model LCE (exhaust) and LCS (supply) are high capacity belt driven propeller fans rated from 3,000 to 40,000 cfm to .625" w.g. static pressure.
PAGE 14
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS MODEL L2 - CONSTRUCTION LEVEL 2 Application Models L2E (exhaust) and L2S (supply) are high capacity wall mounted belt driven propeller fans rated from 5000 to 47,000 CFM and to .75" w.g. static pressure.
PAGE 15
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS MODEL L3 - CONSTRUCTION LEVEL 3 Application Models L3E (exhaust) and L3S (supply) are high capacity wall mounted belt driven propeller fans rated from 35,000 to 85,000 and to 1.0" w.g. static pressure.
PAGE 16
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS PERFORMANCE Model LC Size 20 Limits Model RPM Motor Frame LC 1350 56H Size Motor HP 1/3 Model LC 20 Level 1 Construction 1/4 1/2 3/4 Panel OD Min. Wall Square Opening 24 Damper OD Approx. Wt 22 1/2 85 25 1/2 Static Pressure (Inches W.G) Max BHP Fan RPM Sones (0.00” SP) .000 .100 .125 .150 .200 .250 .300 .375 .500 0.25 905 10.5 3774 3364 3247 3113 - - - - - 0.27 920 10.
PAGE 17
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC and Model L2 Size 24 SOUND and AIR R PERFORMANCE Limits Panel OD Min. Wall Square Opening Model RPM Motor Frame LC 1100 145T 30 L2 1145 145T 30 Size Motor HP 1/4 Model LC 24 Level 1 Construction 1/3 1/2 3/4 1 1 1/2 1/4 1/3 Model L2 24 Level 2 Construction 1/2 3/4 1 1 1/2 2 Damper OD Approx. Wt 31 1/2 28 1/2 90 31 1/2 28 1/2 120 AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.
PAGE 18
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC and Model L2 Size 30 Limits RPM Motor Frame LC 815 145T 36 L2 1070 182T 36 Motor HP 1/4 Model LC 30 Level 1 Construction 1/3 1/2 3/4 1 1 1/2 1/3 3/4 Model L2 30 Level 2 Construction 1/2 1 1 1/2 2 3 and AIR PERFORMANCE Panel OD Min. Wall Square Opening Model Size SOUND R Damper OD Approx. Wt 37 1/2 34 1/2 100 37 1/2 34 1/2 180 AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.
PAGE 19
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC and Model L2 Size 36 SOUND and AIR R PERFORMANCE Limits Panel OD Min. Wall Square Opening Model RPM Motor Frame LC 695 145T 42 L2 845 184T 42 Size Motor HP 1/3 Model LC 36 Level 1 Construction 1/2 3/4 1 1 1/2 2 1/2 1 Model L2 36 Level 2 Construction 3/4 1.5 2 3 5 Damper OD Approx. Wt 43 1/2 40 1/2 105 43 1/2 40 1/2 215 AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.
PAGE 20
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC, Model L2 and Model L3 Size 42 Panel OD Min. Wall Square Opening Damper OD Approx.
PAGE 21
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC, Model L2 and Model L3 Size 48 SOUND and AIR R PERFORMANCE Limits Model RPM Motor Frame LC 455 145T 52 1/2 125 605 184T 54 55 1/2 52 1/2 300 765 215T 54 55 1/2 52 1/2 330 Motor HP Model LC 48 3/4 Level 1 Construction 55 1/2 Approx. Wt L2 1/2 1 1 1/2 2 1/2 3/4 1 Model L2 48 Level 2 Construction 54 Damper OD L3 Size 1 1/2 2 3 Model L3 48 5 Level 3 Construction Panel OD Min.
PAGE 22
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC, Model L2 and Model L3 Size 54 Limits SOUND and Panel OD Min. Wall Square Opening Damper OD Approx.
PAGE 23
MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS Model LC, Model L2 and Model L3 Size 60 SOUND Limits Model RPM and Motor Frame Panel OD Min. Wall Square Opening Damper OD Approx. Wt LC 380 182T 66 67 1/2 64 1/2 285 L2 460 184T 66 67 1/2 64 1/2 490 L3 700 256T 66 67 1/2 64 1/2 530 AIR R PERFORMANCE AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. ® Soler & Palau USA, Div.
PAGE 24
Model L3 Size 72 MODELS LCE/LCS, L2E/L2S, L3E/L3S BELT DRIVE SIDEWALL PROPELLER FANS SOUND and AIR R PERFORMANCE Limits Model RPM Motor Frame L3 545 256T Panel OD Min. Wall Square Opening 80 Damper OD Approx. Wt 78 1/2 600 81 1/2 AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. ® Soler & Palau USA, Div. of Soler & Palau Ventilation Group, certifies that the models shown herein are licensed to bear the AMCA Seal.