Specification Sheet
6
Warranty
Five (5) year limited warranty.
Range
The TD-MIXVENT series consists of nine (9) nominal sized in-line fans. All models are specically
designed for direct connection in-line with industry standard diameter round ducting.
Construction
The TD-MIXVENT models 100, 100x1, 125, and 150 are manufactured in tough reinforced plastic,
models 200, 250, 315, 355, and 400 have a metal casing and are nished in a tough epoxy-polyester
paint coating. The TD fan duct connection anges are manufactured from reinforced plastic, except
for models 200, 250, 315, 355, and 400 which are constructed from epoxy-polyester coated metal.
Impellers
The impeller blades for models 100, 100x1, 125, and 150 are molded in tough ABS plastic. Models
200, 250, 315, 355, and 400 are metal.
Motors
Models 100, 100x1 and 125 :
• Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All
motors include direct single speed connection and are also suitable for voltage speed control.
• Class ll electrical insulation (model 100) & Class l (models 100x1 and 125)
• IP 44 Protection
• Class B Motor Insulation
• Safety auto reset Thermal Overload Protection (fuse type)
• Self-lubricating sleeve bearings.
• Suitable for working airstreams up to 104° F (40°C).
Models 150, 200, 250, 315, 355, and 400:
• Single-phase induction asynchronous motor, with permanent capacitor and external rotor
constructed of die cast aluminum. Models 150, 200, 355 and 400 feature single speed, fully
speed controllable motors. Models 250 and 315 include direct dual speed (LS/HS) connection
motors and are also suitable for voltage speed control.
• Class I electrical insulation
• IP 44 Protection
• Thermal Overload Protection
• Class B Motor Insulation
• Sealed For Life, ball bearings
• Suitable for working airstreams up to 140° F (60°C).
TD-MIXVENT Technical Specications