Specification Sheet

184
LINE OVERVIEW
S&P’s Direct Drive Sidewall Propeller Fan line is designed to exhaust or supply large volumes of air at relatively low
static pressures. With 3 types of construction, the belt drive models are designed for use in a variety of applications for
commercial, industrial and agricultural buildings such as manufacturing and assembly plants, warehouses, parking garages,
gymnasiums, equipment rooms, distribution centers, foundries, boiler rooms, greenhouses and OEM applications. The
direct drive models provide general ventila tion for a wide variety of buildings and enclosed areas within buildings. Examples
include factories, assembly plants, warehouses, gymnasiums, garages, jails,
machine rooms and many others.
These Sidewall Propeller Fans are rated from 300 to 55,000 CFM with static
pressures to 1” w.g. Models range from 10 to 60”. A full line of accessories is
available to meet any need or specication. See the below Model Comparison to
nd the right Direct Drive Sidewall Propeller Fan for your application.
Construction
Type
Model Size Range Performance
Model Overview On
Page
GED
GSD
10 to 20”
300 to 3,500 CFM up
to 3/4” w.g.
196-197
DFE
DFS
10 to 30”
500 to 12,000 CFM up
to 1” w.g.
198-199
DDE
DDS
24 to 60”
3,500 to 55,000 CFM
up to 1” w.g..
200-202
MODEL COMPARISON
MOUNTING ARRANGEMENT OPTIONS
Page Mounting Arrangement Description
185-186 Wall Housing
Heavy-gauge, all galvanized G-90 steel
housing provides a simple solution to installing
a fan and all required accessories in a rough
wall opening. It can be used in exhaust or
supply applications and in fan sizes 10 through
60 inch.
187-188
Filtered Wall
Housing
For installations where ltering is required.
Heavy-gauge, all galvanized G-90 steel ltered
wall housings are available in both supply and
exhaust congurations. They are available in
nine (9) sizes for fans ranging from size 14 to
60 inches. They are designed with the draw-
thru concept to achieve the highest lter and
fan efciencies.
189 Wall Collar
Heavy-gauge, all G-90 galvanized mounting
collar provides a simple solution to installing a
fan in a rough wall opening when a rear safety
guard is NOT required.
MODELS GED/GSD, DFE/DFS, DDE/DDS
DIRECT DRIVE SIDEWALL PROPELLER FANS
Model GED is available
in our Quickship program.
Most sizes are available for next
day or 10-day shipping from stock.
GC_DD PROPS_0111 January 2011