Specification Sheet

4
DIMENSIONAL DATA
Size
Dimensions (Inches)
Avg. Ship
weight
(lbs.)
A B C D E F
100A 21 13 7 2 20 13-3/4 25
120A-121A 28 16 8 3 24 15-3/4 42
160A-161A 32 18 8-1/2 3 28 19-3/4 55
201A 36 20 9-3/4 3 32 23-3/4 75
SOLER & PALAU USA LIMITED WARRANTY
Soler & Palau USA (manufacturer), 6393 Powers Avenue, Jacksonville, Florida 32217, warrants equipment of its manufacture to be free from defects
in design, materials and workmanship (exclusive of abrasion, corrosion or erosion) for one (1) year from the date of shipment to the original purchaser or
the date of notification of readiness to ship. Motor warranty is one (1) year. In order to claim the benefit of this warranty, buyer must notify manufacturer in
writing of the claimed defect within ten (10) days after discovering it and return this equipment or parts to the factory with transportation prepaid. In the event
of on-site repair, no service technician will be dispatched until manufacturer receives your written purchase order. If any of the following conditions exist,
the warranty will be null and void: (1) Buyer has permitted other persons not approved or authorized by manufacturer to alter, adjust, replace or repair the
equipment or any part there of. (2) Buyer has not followed instructions or other directions given in the contract documents or our maintenance manual. (3)
When breakage or other loss or damage is the result of any negligence, misuse or fault on the part of any operator or other person not under our supervision
or control. (4) The defect is the result of designs or drawings made, furnished or specified by others. (5) In the case of goods not manufactured but supplied
by the manufacturer as part of a contract, manufacturer shall only be liable to the same extent that our supplier is to manufacturer, not to exceed any liability
manufacturer would have for warranty on our own equipment. (6) Buyer has not paid in full any invoices submitted to buyer which are due for payment.
(7) Unusual wear and tear of the equipment. Statements relating to the product, its use or installation made prior to the execution of the agreement, are
not warranties except to the extent that the contrary is expressly set forth herein. It is understood that such statements were not intended to, and did not,
form a part of the agreement; they were merely made in the course of negotiations of the parties. This warranTy is in lieu of any oTher express or implied
warranTies, including any implied warranTy of merchanTabiliTy or fiTness for any parTicular purpose. our sole and exclusive obligaTion under This
warranTy is To repair or replace defecTive equipmenT or parTs or, aT our opTion, To pay The reasonable cosT of repair or replacemenT. buyer agrees
ThaT no oTher remedy (including, buT noT limiTed To, incidenTal or consequenTial damages, damages for losT profiTs or sales, or damages for injuries
To person or properTy) shall be available. noTwiThsTanding The above, The ToTal amounT ThaT may in any evenT be payable in seTTlemenT of liabiliTy,
however incurred, shall noT exceed The conTracT price.
Axial direct drive power roof ventilator shall be Model ARE (Exhaust) or Model ARS (Supply) as manufactured by Soler &
Palau USA, Jacksonville, Florida.
Spun aluminum housing, venturi, and curb cap shall be heavy-gauge aluminum construction. Curb cap corners shall be
welded not staked.
Aluminum propeller shall have steel hub and be statically and dynamically balanced and keyed to the motor shaft. Motor and
propeller shall be mounted on a U-spring Suspension System for radial and axial vibration isolation. Rubber isolators are not
acceptable.
Motors shall be of nationally recognized manufacturer with permanently lubricated bearings and provided with the specified
voltage, phase, and enclosure. A wiring chase shall be provided for ease of electrical connection to the factory provided
disconnect switch.
Fans will be available UL-705 listed and tested in accordance with AMCA 301 (Sound) and AMCA 210 (Air).
4
4
Typical Specification
Dimensional Data
Standard 705
(Optional)
Distributed By:
Soler & Palau USA
6393 Powers Avenue
Jacksonville, FL 32217
800.961.7370
800.961.7379
www.solerpalau-usa.com
Soler & Palau Canada
61 A Baywood Road
Toronto, ON M9V 3Y8
866.733.0233
866.358.5346
www.solerpalaucanada.com
DUE TO CONTINUING RESEARCH SOLER & PALAU USA RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE