User Manual
The ability to find secondary radio relays (Test relay) allows using your Field Transmitter as a
tool able to help you in installation and definition of the best location for relays of an IQ-TBOS
Radio Network. During finding of secondary radio relays, the transmitter displays the radio
reception level of each secondary relay in the list. This information will help you to find the
best location for your new relay.
Then, Radio Network building is launch from IQ V2 Software (See Help Section of your IQ
software)
Please read the IQ-TBOS Specifications and Installations Guide to
know more about radio network mana
ge
m
e
nt.
IQ V2.0 Central Control
Sy
s
t
em
.
A Radio Network is built on a based Master Radio Module (installed in an ESP-LX Series
satellite) and if necessary, one or several TBOS Radio Relay(s). The Master Radio Module
and/or Radio Relays have capability to communicate with one or several TBOS Controllers
equipped with TBOS-II Radio Adaptors.
To communicate, those radio devices MUST have th
e
sam
e
Radio
Ne
two
rk
Number.
Each Master Radio Module (or each radio network) MUST have a different Radio Network
Number.
The IQ-TBOS Master Radio Module allows sending / receiving TBOS data from PC – It provides:
- Serial communication with the NCC
- Radio communication with a maximum of 15 TBOS Radio Relays.
- Radio Communication with a maximum of 32 local TBOS/TBOS-II Control Modules
equipped with TBOS-II Radio Adaptors.
- Sensor alarm management.