User Manual

31


‐ Select‘’RadioRelayList’’andvalidatewithOK.

‐ FindingScreenisdisplayedduring25to60secondsdependingonthenumberofrelays.
 
‐ Oncethefindingcommandending,theradiorelayslistisdisplayedwiththefollowing
information:
o Nameofeachrelay(TBOSRadioRelayorMasterRadioModule)
o RadioreceptionlevelbetweenTBOS‐II™FieldTransmitterandRadioRelay
o BatterychargelevelofallTBOSRadiorelay

TheRa
diorelaylistisnotsaved.Anewfindingisnecessaryfor eachconnection.
AutomaticTBOSfindingfromRadiorelay
‐ FromtheRadioRealyslist,launchanautomaticfindingcommand.Upto32TBOScontrollers
canbelocatedandlisted.
 
‐ Oncethefindingending,thefollowinginformationisavailableforeachControlModule‐
RadioAdaptor

o TBOS/TBOS‐IIControlModulename.
o BatterychargelevelofTBOS‐II™RadioAdaptorandbatterychargelevelofTBOS‐II™
ControlModule(ThisinformationisnotavailableforTBOS1stgeneration,only
emptysymbolappearswhenthebatterylevelislow)
o RadioreceptionlevelbetweenradiorelayandTB
OS/TBOS‐IIcontroller.

‐ SelecttheTBOSyouwantinthelistandpressOKtoconnectit–Youcanwork,program,
modify…thiscontrollerandthentrans mitnewinformation,fromyourfieldtransmitter,thru
therelay(see,ChapterG6ofthismanual)

Ifaprogramorma
nualcommandtransmissionismadewhenirrigationisrunning,thecurrent
cycleisstopped.